This project profile includes concrete fence painting—a backyard concrete block fence that needed an updated look. Our client wanted to refresh the look of this aging wall before redoing the landscape in the backyard. The client was looking for a color that would help make the future evergreens stand out. We opted to choose a light gray since the color choices were limited when using Loxon® XP Masonry paint. Plus, our client felt that a white fence which would stand out a little too much.

The wall was starting to show it’s age. It had faded paint, cracks, and chips in the surface. If left unattended, the concrete could potentially break apart faster than it would if it was sealed. Water will likely enter the cracks in the surface. With drastic temperature swings, the constant heating and cooling of moisture aids in the breakdown of concrete…concrete fence painting being both needed and necessary. That’s why we wanted to apply Loxon® XP masonry paint. This coating helps seal the concrete which hopefully prevents premature concrete failure. Loxon® XP is available at Sherwin-Williams stores. Find out more about Loxon® XP here.

Unfinished Concrete Fence
Unpainted Concrete Fence
Prepping the Masonry Wall

The fence was pressure washed using high-pressure water coupled with a diluted bio-safe cleaning solution. Pressure washing helps remove all the grim, dirt, spider webs, and mold. The previous coating was left alone since we deemed it wasn’t necessary for proper adhesion of the new paint layer. After pressure washing, the wall was allowed to dry for twenty-four hours. Luckily, Colorado Springs weather cooperated, and the wall dried out in a couple of hours. But we like to make sure and allow it to dry for the full twenty-four hours, so we don’t have any problems related to moisture in the concrete.

Next, we started the prep work of masking off fences, stone pillars, and the concrete wall cap. We used 3M Scotch masking tape (1.41″) with Trimaco masking paper (9″) to mask everything off. The ground was covered with drop cloths to help catch any overspray while metal shields gave us the protection where the wall meets the ground. Luckily, we had a super calm day, so overspray wasn’t a big concern. Loxon® XP was applied using a fairly thick mil thickness.​​

We then back rolled with a 1 1/4″ nap roller, which helped push this paint into all the cracks and crevices.

With Loxon® XP, it needs to be sprayed on thick so that the coating holds its pigment and prevents premature pigment fading. During application, the coverage was around ~125 sq. ft per gallon. We allowed the surface to dry for about an hour before we pulled all the masking tape off.

Painted Masonry Wall
Masonry Painting in Colorado Springs

Overall, we were pleased that this project turned out the way the homeowner envisioned. Loxon® XP is a fantastic product with the only downside being the low square foot coverage. We recommend using this on concrete block, concrete, and stucco.

If you are looking to complete a project similar to this in the Colorado Springs and surrounding areas, or for a painting company offering services similar to this one, feel free to reach out for a quote. We would love to help you achieve the look you want! Email us at estimates@wrightprimeandpaint.com or call us at (719)-362-5304